A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys     

S. A. Gil-Zepeda  J. C. Montalvo-Arrieta  R. Vai  F. J. Snchez-Sesma 《Soil Dynamics and Earthquake Engineering》2003,23(1):77-86

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.  相似文献   

Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components     

D. Lopez Garcia  T. T. Soong 《地震工程与结构动力学》2003,32(1):111-129

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

偏心结构非线性地震反应分析的一种简化方法   总被引：1，自引：1，他引：1  

戴君武  张敏政  郭迅  黄玉龍 《地震工程与工程振动》2003,23(3):60-67

本文建立了基于结构状态方程和偏心结构体系的层剪力-扭矩等效屈服EYST面概念的求解平扭耦联非线性地震反应的分离-予估-修正递推算法，编制了相应的计算程序。通过与三个单层偏心结构模型的破坏性地震模拟试验结果的对比，验证了小变形阶段平-扭耦联地震反应算法的实用性和可靠性。算例表明，该程序数据处理量小，运算快捷，便于应用。  相似文献   

两结构高效阻尼控制体系试验研究   总被引：2，自引：0，他引：2  

闫维明  陆赢祺  彭凌云 《地震工程与工程振动》2003,23(3):160-169

本文通过模拟地震动振动台试验，研究了两个相邻结构模型的地震响应，结构模型采用一种高效阻尼装置(High Efficient Damper for Multi—Structure System即HEDMS)连接。非线性时程分析与振动台试验结果都证明了该阻尼装置能高效发挥软钢阻尼器的耗能能力，从而显著减轻两结构模型的地震响应。同时，研究还指出了进行阻尼装置设计时应该注意的一些问题。  相似文献   

团树断层场地地震反应的数值模拟     

李山有  王学良  金星  杨柏坡  孙平善 《地震工程与工程振动》2003,23(4):17-21

团树断层场地在多次地震中出现了烈度异常。为了弄清烈度异常的原因，应用显式有限元方法，数值模拟了在脉冲地震波斜入射情形下断层场地的地震反应。结果表明：在基岩山脚附近土层场地地震动放大比基岩山区平均高4倍、比远离基岩山脚土层场地平均高2倍，与历史震害分布有较好的对应。  相似文献   

强震观测建筑结构的地震反应分析   总被引：5，自引：0，他引：5  

李鸿晶  朱士云  Mehmet Celebi 《地震工程与工程振动》2003,23(6):31-36

选择取得强震观测资料的建筑结构为研究对象，采用有限元法建立结构的动力反应分析模型，利用SAP2000程序分析了结构的地震反应，并同实际记录到的结构地震反应进行了对比分析，讨论了结构模型参数估计和一些不确定因素对模型精度的影响。  相似文献   

储液罐液—固—土耦合非线性翘离振动分析     

唐友刚  董艳秋 《地震工程与工程振动》1997,17(1):95-101

本文考虑液固耦联及底板几何非线性与土壤弹性，建立了液－固－土耦合的储液罐翘离分析力学模型。算例表明，恢复力矩与翘离角之间的关系可以表达为分段线性，翘离将使地震响应增大。  相似文献   

钢支撑性能对高层钢结构动力反应的影响   总被引：1，自引：0，他引：1  

邓雪松  张耀春 《地震工程与工程振动》1997,17(3):52-59

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。  相似文献   

可控消能减震原理及结构分析   总被引：3，自引：0，他引：3  

阎兴华 《地震工程与工程振动》1997,17(3):66-72

本文介绍一种新的减震结构体系及其分析方法。这种结构体系的减震系统由控制装置及耗能装置组成，控制装置根据结构反馈的相关信号，在回头点处启动耗能装置，耗散大量地震能量，属于半主动控制范畴。试验及理论分析表明，这种结构体系的减震效果良好，能够将结构的地震位移反应降低５０％以上。本文介绍了这种结构体系的减震工作原理、数学模型、理论分析方法及算例，并给出了相应的结论。  相似文献   

基于自平衡力的弹塑性动力反应分析方法   总被引：1，自引：3，他引：1  

张令心  江近仁 《地震工程与工程振动》1997,17(4):9-17

本文给出了一个基于自平衡力的弹塑性结构动力反应分析的新方法，详细叙述了方法的原理和过程，并对用改进的Ｔａｋｅｄａ滞变模型描述的梁单元框架结构给出了具体的分析方法。这个方法与传统的方法不同，在分析中不必修正结构的刚度矩阵，而代之以计算代表塑性铰变形引起的应力重分布的动力自平衡力，因而大大地节省了计算机时，最后通过算例对本文方法进行了验证。  相似文献